Skip to content

2 Comments

  1. Tom Andrews
    June 10, 2018 @ 6:19 am

    Hi Brion!
    Most ascenders are only intended for just that: ascension. NOT to arrest dynamic falls. When doing this, depending on the make and model, they can sometimes damage and possibly sever the rope or pop off altogether! If used this way, a load limiter must be placed between the climber and the ascender.
    The best self-belay device on the market I’ve used so far is a Petzl ASAP. Being designed specifically for this purpose, this device moves in both directions (up and down) and will lock up during a fall. Again a load-limiter must be used.
    Works like a charm, and yes, I’ve fallen on one.
    Some background on me:
    I’ve been an AMGA certified climbing guide for over 25 years. I’m a stage rigger, stunt rigger and aerial rigger for stage and screen (sailboat rigging too!)
    Brion, I’m a huge fan. “The Rigger’s Apprentice” has been one of my go-to references for many years, as it is with many pros in my industry(s). Feel free to contact me with any questions or comments regarding this or any other aerial shenanigans.
    Hope this helps…

    • Brion Toss
      June 10, 2018 @ 4:16 pm

      Hi Tom, and thanks for the note.
      As it happens, I am familiar with the ASAP, and I like it very much. I also have some notion of the limitations of various types and grades of ascenders, but I didn’t think the article was the place to go into those important distinctions, nor when load limiters are advised (in my world, I do not generally need one, as a few inches is as far as I can fall without fetching up). I hope to visit the topic in more detail in a future post; meanwhile my main purpose was to tell a story with a metaphor about letting go.
      Thank you for your very kind words — it means a lot, coming from someone of your skill level.