Quote:
Originally Posted by Brion Toss
Hi again,
Not clear at all on what you mean. Is there a way you could post a drawing? In any case, there should be no ends at all; the purchase's rope is formed into a grommet, with a constant-diameter splice. Looking forward to seeing a drawing or picture.
Fair leads,
Brion Toss
|
Thanks so much for replying to my posting. This is really driving me crazy.
Well no ends, that is an interesting addition. That solves one problem I was wondering about.
The question I have remains that, spliced together or not, there are two parts of the line that come off the boom that need to be secured to hold the boom in. Right now I have a horn cleat and a turning block-camcleat. With my 5:1 I use one or the other of these and with the 3:1/6:1 it is possible for me to use both but that would make some things difficult it would seem. Here is what I have now.
http://l-36.com/newstuff5.JPG (please excuse the mess, this was just before I painted the cockpit and added new scuppers)
http://l-36.com/traveler/Traveler1.jpg
http://l-36.com/traveler/Traveler2.jpg
And here is the sketch you requested:
http://l-36.com/3161.gif
Remember, the goal is to be able to pull the two lines hand over hand with the lines coming off the boom similar to the motion of hosting a sail. I also need to be able to play the sheet from a rail position. We like to have it wrapped half way around a cleat when we do that. That little bit of friction is just right for controlling the line.
The standard solution I think involves a Harken 402 but for a number of reasons I don't like that. A possible solution is for me to make a similar piece of hardware modified for my boat layout but that would mean giving up on my goal of having the lines come off the boom.
Allen