Not a problem
Hi,
First of all, crevice corrosion is more likely to happen in the absence of sealant. Also chloride corrosion. Second, crevice corrosion only affects the stainless component here; what you might be thinking of is galvanic corrosion. This is also more likely to happen in the absence of sealant, but in any event the bronze, being less noble, would be the part to suffer. And no major loss if it did, as that ring is just an organizing bit, to distribute the strands and set wedge depth on assembly.
Seal correctly, and you eliminate air and water.
Fair leads,
Brion Toss
|