Thread: Splicing 12 strand Dyneema to VPC for halyard
View Single Post
  #1  
Old 04-10-2014, 06:27 AM
RH Puffinstuff RH Puffinstuff is offline
Junior Member
  
Join Date: Apr 2014
Posts: 3
Default Splicing 12 strand Dyneema to VPC for halyard
Ahoy!

I'm replacing the wire/rope halyards on my Merit 25 with 3/16" amsteel and 8mm VPC. I would like to know what the best (or only) splice would be for this. I chose to do it this way because I don't want to replace the notched sheaves in the mast. Half VPC to half amsteel.

I apologize if this is covered elsewhere and of course beg to be forgiven for ignorance.

Thanks for any help!

Rob
Reply With Quote