SparTalk
EDUCATION CATALOG RIGGING CONSULTATION HOME CONTACT US

Go Back   SparTalk > SparTalk
FAQ Members List Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 06-18-2006, 09:49 PM
jkolle jkolle is offline
Junior Member
 
Join Date: Jun 2006
Posts: 2
Default Forestay attachment inside mast

I recently purchased a 1978 Ranger 22. The boat has a fractional rig with internal halyards. The previous owner attached the forestay to the side of the mast at the bolt that holds the upper shrouds, which is clearly wrong. There a 3" long, 1" wide slot in the mast for the internal jib halyard block plus enough space above the block to lead the forestay up to the shroud bolt. On other Ranger 22s, this is where the foretay leads. Apparently there is some sort of toggle that attaches the forestay to the bolt. The toogle is missing and I can find no reference to the appropriate toggle size to use or whether this is a custom part. The bolt is 3/16" dia, 4" long and runs through a 3/8" dia. aluminum compression tube. The bolt is bent slightly, perhaps indicating that there was once a toggle there. I could install a 3/8" toggle but I am uncomfortable with the bending load on the bolt and compression tube. I could also install a mast dog, but this is not how these Rangers were meant to be rigged.

Any ideas on how this boat should be rigged?

Ragards,
Jack Kolle
True Blue
Lake Union
Seattle
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -7. The time now is 03:14 PM.


Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.