Deadeyes vs just lanyards with HM materials

[Bott]

Thank you for the info, both Jack and John...

Was this the article you were talking about Jack? http://www.hampidjan.is/Products/YachtRigging/

[Bott]

One follow up:

If one wanted to use more traditional deadeyes and lanyard materials (more like polyesters instead of HM line), would anyone expect adverse affects from the cow hitch (ring hitch, larks head) across the top of the upper deadeye (the "standard" tie-off method) pushing down on or crushing the Dux between the lanyard and deadeye?

I imagine one could/should be prudent and put a cover on the dux for chafe down there, but is the compression on a flat face something to watch for?

Thanks again.

[Jack]

Yes that is the article I failed to post Bott.

As far as your question goes, If I understand you, you wonder if you can make off the lashings in the traditional manner, on top the Dead Eye?. I would say "sure why knot?" I would not worry about chaff if I understand what you are talking about. Dynex is used for butchers gloves because the material is so chaff resistant.
I would question using a different lashing material though. If you get most anything else you will have stretch and creep to deal with. After using Dux on the shrouds, you have the makings of a very strong no creep no stretch set up. If you lash it with with something else you may loose all the advantages of the Dux (except weight saving)
Also a traditional lashing hitch may not work with Dynex as it is very slippery. We have found multiple hitches or turns are required with Dynex where you could use much less with a poly or nylon line.

[Brian Duff]

on all the dux riggs we have put together with deadeyes we tie off in the traditional manner, for both dymeema lashings and polyester lashings.

[Jack]

Ain't nuttin' wrong with tradition, most of the stuff was worked out long before I was born!

I would love to see some wood deadeyes combined with Dynex Dux. I believe it is going to be the next wood/epoxy combination. The way wood was "converted" and rediscovered for boat building in the last 30 years, when used with epoxy, we will see rope replacing wire with the new materials!

[Brian Duff]

http://voyageundersail.com/_wsn/page4.html

one lousy photo here, the photo of sean macleod, knida shows that rig with the dux and trad deadeyes...