Dyneema short splice

[Anton B]

No idea, but would be interested in seeing some pics and hearing what you find out from testing!

Anton

[k7cej]

My storm rode lines are made up from 1" nylon 12-strand single-braid, and the recommended splice is to
1. Split the end into two bundles of six each.
2. Pass one bundle of six through the standing part
3. Marry adjacent strand of opposite twist, to create three bundles on each side.
4. tuck each bundle back along the standing part, over one and under two.

If done on the spectra it would be painfully slow but would be shorter than the normal bury.
Could also do a lock splice to make the eye (A thru B, B thru A) and a very short bury, with stitching.

[benz]

Thanks Craig,

I'm familiar with the 12-strand Nylon splice, but that nylon 12-strand is not the same construction as the 12-strand hollow braid, and the nylon fibers come with a twist not present in the dyneema. So I'm concerned that being a differently laid, non-stretchy fiber, dyneema might not be as amenable to that splice.
But, since there hasn't been a chorus of doom, I'll take that to mean there's no obvious, glaring downsides, and carry on with my experiments.
Thanks again.
Best,
Ben

[Brion Toss]

Hi,
And first, I believe that it is the same construction in both nylon and Spectra; the big differences are helix angle, twist, and of course relative slickness.
As to splice options, Samson's method is a hybrid, meant to reduce splice length, without the tedium of an all-tuck splice. I recently made drogue eyes using a slight variation on a Yale splice. You can see the finished product on my Facebook page: https://www.facebook.com/photo.php?f...type=1&theater. More tucks, in a much different pattern than for the nylon splice.
Fair leads,
Brion Toss